Hydrogen Evolution Research Articles

Construction of a Dual-Function Mo-ZIS@Ti for Photocatalytic Benzyl Alcohol Oxidation and Hydrogen Evolution Performance.

The photocatalytic oxidation of benzyl alcohol and the simultaneous evolution of hydrogen from water are efficient dual-optimal routes. It is important to develop composite catalysts that combine redox properties and facilitate electron-hole separation and transport. Herein, the bimetallic-doped Mo-ZIS@Ti photocatalyst was designed and synthesized, and the selective oxidation of benzyl alcohol and hydrogen evolution by water splitting was realized at the same time. Under visible light irradiation, benzyl alcohol was completely converted with more than 99% selectivity for benzaldehyde, and the H2 production rate was 5.6 times higher than the initial ZIS. The exceptional catalytic performance was ascribed to utilizing Ti-MIL-125 as a precursor, wherein slowly releasing-doped Ti formed robust Ti-S bonds that quickly transfer electrons and reduce sites. Meanwhile, doping Mo effectively captures photogenerated holes and acts as active sites for oxidation reactions. Both experimental characterization and work function calculations demonstrate that the bimetallic synergism effectively modulates the electronic structure of ZIS, promotes the directional separation of electrons and holes, and significantly improves the photoactivity and stability of ZIS. This work contributes a route to obtain benzaldehyde and green hydrogen at the same time and also gives new insights for the construction and mechanism study of bimetallic-doping catalysts.

Theoretical study of transition metal-doped β12 borophene as a new single-atom catalyst for carbon dioxide electroreduction.

The electrocatalytic carbon dioxide reduction reaction (CO2RR) presents a viable and cost-effective approach for the elimination of CO2 by transforming it into valuable products. Nevertheless, this process is impeded by the absence of exceptionally active and stable catalysts. Herein, a new type of electrocatalyst of transition metal (TM)-doped β12-borophene (TM@β12-BM) is investigated via density functional theory (DFT) calculations. Through comprehensive screening, two promising single-atom catalysts (SACs), Sc@β12-BM and Y@β12-BM, are successfully identified, exhibiting high stability, catalytic activity and selectivity for the CO2RR. The C1 products methane (CH4) and methanol (CH3OH) are synthesized with limiting potentials (UL) of -0.78 V and -0.56 V on Sc@β12-BM and Y@β12-BM, respectively. Meanwhile, CO2 is more favourable for reduction into the C2 product ethanol (CH3CH2OH) compared to ethylene (C2H4) via C-C coupling on these two SACs. More importantly, the dynamic barriers of the key C-C coupling step are 0.53 eV and 0.73 eV for the "slow-growth" sampling approach in the explicit water molecule model. Furthermore, Sc@β12-BM and Y@β12-BM exhibit higher selectivity for producing C1 compounds (CH4 and CH3OH) than C2 (CH3CH2OH) in the CO2RR. Compared with Sc@β12-BM, Y@β12-BM demonstrates superior inhibition of the competitive hydrogen evolution reaction (HER) in the liquid phase. These results not only demonstrate the great potential of SACs for direct reduction of CO2 to C1 and C2, but also help in rationally designing high-performance SACs.

Bi-directional charge transfer channels in highly crystalline carbon nitride enabling superior photocatalytic hydrogen evolution.

Introducing a donor-acceptor (D-A) unit is an effective approach to facilitate charge transfer in polymeric carbon nitride (PCN) and enhance photocatalytic performance. However, the introduction of hetero-molecules can lead to a decrease in crystallinity, limiting interlayer charge transfer and inhibiting further improvement. In this study, we constructed a novel D-A type carbon nitride with significantly higher crystallinity and a bi-directional charge transfer channel, which was achieved through 2,5-thiophenedicarboxylic acid (2,5-TDCA)-assisted self-assembly followed by KCl-templated calcination. The thiophene and cyano groups introduced serve as the electron donor and acceptor, respectively, enhancing in-plane electron delocalization. Additionally, introduced potassium ions are intercalated among the adjacent layers of carbon nitride, creating an interlayer charge transfer channel. Moreover, the highly ordered structure and improved crystallinity further facilitate charge transfer. As a result, the as-prepared photocatalyst exhibits superior photocatalytic hydrogen evolution (PHE) activity of 7.449 mmol h-1 g-1, which is 6.03 times higher than that of pure carbon nitride. The strategy of developing crystalline D-A-structured carbon nitride with controlled in-plane and interlayer charge transfer opens new avenues for the design of carbon nitride with enhanced properties for PHE.

Ultralow Catalytic Loading for Optimised Electrocatalytic Performance of AuPt Nanoparticles to Produce Hydrogen and Ammonia.

The hydrogen evolution and nitrite reduction reactions are key to producing green hydrogen and ammonia. Antenna-reactor nanoparticles hold promise to improve the performances of these transformations under visible-light excitation, by combining plasmonic and catalytic materials. However, current materials involve compromising either on the catalytic activity or the plasmonic enhancement and also lack control of reaction selectivity. Here, we demonstrate that ultralow loadings and non-uniform surface segregation of the catalytic component optimize catalytic activity and selectivity under visible-light irradiation. Taking Pt-Au as an example we find that fine-tuning the Pt content produces a 6-fold increase in the hydrogen evolution compared to commercial Pt/C as well as a 6.5-fold increase in the nitrite reduction and a 2.5-fold increase in the selectivity for producing ammonia under visible light excitation relative to dark conditions. Density functional theory suggests that the catalytic reactions are accelerated by the intimate contact between nanoscale Pt-rich and Au-rich regions at the surface, which facilitates the formation of electron-rich hot-carrier puddles associated with the Pt-based active sites. The results provide exciting opportunities to design new materials with improved photocatalytic performance for demanding sustainable energy applications.

Deep Red Light Driven Hydrogen Evolution by Heterojunction Polymer Dots for Diabetic Wound Healing

Deep Red Light Driven Hydrogen Evolution by Heterojunction Polymer Dots for Diabetic Wound Healing

Mechanistic Studies of Stimulus-Response Integrated Catalysis of Single-Atom Alloys under Electric Fields for Electrochemical Nitrogen Reduction.

The present work introduces a novel catalytic strategy to promote the nitrogen reduction reaction (NRR) by employing a cooperative Cu-based single-atom alloy (SAA) and oriented external electric fields (OEEFs) as catalysts. The field strength (F)-dependent reaction pathways are investigated by means of first-principle calculations. Different dipole-induced responses of intermediates to electric fields break the original scaling relationships and effectively tune not only the activity but also the product selectivity of the NRR. When the most active Os1Cu SAA is taken as an example, in the absence of an OEEF, the overpotential (η) of the NRR is 0.62 V, which is even larger than that of the competitive hydrogen evolution reaction (HER). A negative field not only reduces η but switches the preference to the NRR over the HER. In particular, η at F = -1.14 V/Å reaches the bottom of 0.18 V, which is 70% lower than that in the field-free state.

Recent advances in electrocatalysts for efficient hydrogen evolution reaction

Recent advances in electrocatalysts for efficient hydrogen evolution reaction

The Micron-Droplet-Confined Continuous-Flow Synthesis of Freestanding High-Entropy-Alloy Nanoparticles by Flame Spray Pyrolysis.

Alloying multiple immiscible elements into a nanoparticle with single-phase solid solution structure (high-entropy-alloy nanoparticles, HEA-NPs) merits great potential. To date, various kinds of synthesis techniques of HEA-NPs are developed; however, a continuous-flow synthesis of freestanding HEA-NPs remains a challenge. Here a micron-droplet-confined strategy by flame spray pyrolysis (FSP) to achieve the continuous-flow synthesis of freestanding HEA-NPs, is proposed. The continuous precursor solution undergoes gas shearing and micro-explosion to form nano droplets which act as the micron-droplet-confined reactors. The ultrafast evolution (<5ms) from droplets to <10nm nanoparticles of binary to septenary alloys is achieved through thermodynamic and kinetic control (high temperature and ultrafast colling). Among them, the AuPtPdRuIr HEA-NPs exhibit excellent electrocatalytic performance for alkaline hydrogen evolution reaction with 23mV overpotential to achieve 10mA cm-2, which is twofold better than that of the commercial Pt/C. It is anticipated that the continuous-flow synthesis by FSP can introduce a new way for the continuous synthesis of freestanding HEA-NP with a high productivity rate.

Highly Selective Electroreduction of Nitrobenzene to Aniline by Co-Doped 1T-MoS2.

The selective electrocatalytic reduction of nitrobenzene (NB) to aniline demands a desirable cathodic catalyst to overcome the challenges of the competing hydrogen evolution reaction (HER), a higher overpotential, and a lower selectivity. Here, we deposit Co-doped 1T MoS2 on Ti mesh by the solvothermal method with different doping percentages of Co as x % Co-MoS2 (where x = 3, 5, 8, 10, and 12%). Because of the lowest overpotential, lower charge-transfer resistance, strong suppression of the competing HER, and higher electrochemical surface area, 8% Co-MoS2 achieves 94% selectivity of aniline with 54% faradaic efficiency. The reduction process follows first-order dynamics with a reaction coefficient of 0.5 h-1. Besides, 8% Co-MoS2 is highly stable and retains 81% selectivity even after 8 cycles. Mechanistic studies showed that the selective and exothermic adsorption of the nitro group at x % Co-MoS2 leads to a higher rate of NB reduction and higher selectivity of aniline. The aniline product is successfully removed from the solution by polymerization at FTO. This study signifies the impact of doping metal atoms in tuning the electronic arrangement of 1T-MoS2 for the facilitation of organic transformations.

Synthesis of Rhenium-Doped Copper Twin Boundary for High-Turnover-Frequency Electrochemical Nitrogen Reduction.

The precise design and synthesis of active sites to improve catalyst's performance has emerged as a promising tactic for electrochemistry. However, it is challenging to combine different types of active sites and manipulate them simultaneously at atomic resolution. Here, we present a strategy to synthesize Re atom-doped Cu twin boundaries (TBs), through pulsed electrodeposition and boundary segregation. The Re-doped Cu TBs demonstrate a highly efficient nitrogen reduction reaction (NRR) performance. Re-doped Cu TBs showed a turnover frequency of ∼5889 s-1, ∼800 times higher than the pure Cu TB active centers (∼7 s-1). In addition to the "acceptance-donation" activation of N2 molecules, theoretical calculations also reveal that the Re-Re dimer on TB can boost the NRR and impede the hydrogen evolution reaction synchronously, rendering Re-doped Cu TB catalysts with high NRR activity and selectivity.

Positively Charged Amino Acid-Modulated Interfacial Chemistry and Deposition Textures for Highly Reversible Zinc Anodes.

Interfacial active water molecule-induced parasitic reactions and stochastic Zn2+ transport-caused dendrite issue significantly impede the implementation of aqueous Zn-ion batteries. Herein, three positively charged amino acids, namely arginine, histidine, and lysine, were utilized as adsorption-type electrolyte additives to enhance the stability and reversibility of Zn anodes. Combined theoretical and experimental analyses verified that these amino acid cations can synergistically modulate the interfacial microenvironment and promote orientational Zn deposition. The adsorbed amino acid cations reconfigured the interfacial electric double layer structure, forming SO42-- and H2O-poor interfaces, thereby retarding hydrogen evolution and corrosion side reactions. Simultaneously, the preferential adsorption of the amino acid cations at specific facets induced crystallographic orientational Zn deposition along unterminated facets. Three deposition architectures, namely planar texture, subvertical alignment, and vertical erection, were obtained, all effectively inhibiting dendrite formation. Consequently, symmetric cells with the three amino acid cations exhibited high stripping/plating reversibility of over 2000 cycles at 5 mA cm-2. Moreover, MnO2-based full cells exhibited markedly improved stabilities compared with their additive-free counterparts.

Improving NiFe Electrocatalysts through Fluorination-Driven Rearrangements for Neutral Water Electrolysis.

Neutral electrolysis to produce hydrogen is prime challenging owing to the sluggish kinetics of water dissociation for the electrochemical reduction of water to molecular hydrogen. An ion-enriched electrode/electrolyte interface for electrocatalytic reactions can efficiently obtain a stable electrolysis system. Herein, we found that interfacial accumulated fluoride ions and the anchored Pt single atoms/nanoparticles in catalysts can improve hydrogen evolution reaction (HER) activity of NiFe-based hydroxide catalysts, prolonging the operating stability at high current density in neutral conditions. NiFe hydroxide electrode obtains an outstanding performance of 1000mA cm-2 at low overpotential of 218mV with 1000 h operation at 100mA cm-2. Electrochemical experiments and theoretical calculations have demonstrated that the interfacial fluoride contributes to promote the adsorption of Pt to proton for sustaining a large current density at low potential, while the Pt single atoms/nanoparticles provide H adsorption sites. The synergy effect of F and Pt species promotes the formation of Pt─H and F─H bonds, which accelerate the adsorption and dissociation process of H2O and promote the HER reaction with a long-term durability in neutral conditions.

Enhancing the Life Cycle of Zinc-Iodine Batteries in Ionic Liquid-Based Electrolyte.

Aqueous zinc-iodine (Zn-I2) batteries are gaining significant attention due to their low-cost, high safety and high theoretical capacity. Nevertheless, their long cycle and durability have been hampered due to the use of aqueous media that overtime lead to Zn dendrite formation, hydrogen evolution reaction, and polyiodide dissolution. Xiao et. al., recently reported the addition of an imidazolium-based ionic liquid (IL), to an aqueous electrolyte, that plays a key role in modifying the solvation of Zn2+ ions in the bulk electrolyte and the inner Helmotlz plane, which eliminates free H2O molecules to be present on the Zn anode surface. UV/Vis and NMR spectroscopy also indicates a strong interaction between imidazolium cation [EMIM]+ and I3-, thereby reducing polyiodide shuttling and enhancing the cycle life of the battery. Overall, a capacity decay rate of only 0.01 % per cycle after over 18,000 cycles at 4 Ag-1, is observed making the use of IL additives in aqueous electrolytes highly promising candidates for Zn-I2 batteries.

Mechanistic Insights into Electrocatalytic Hydrogen Evolution by an Exceptionally Stable Cobalt Complex.

Co(aPPy) is one of the most stable and active molecular first-row transition-metal catalysts for proton reduction reported to date. Understanding the origin of its high performance via mechanistic studies could aid in developing even better catalysts. In this work, the catalytic mechanism of Co(aPPy) was electrochemically probed, in both organic solvents and water. We found that different mechanisms can occur depending on the solvent and the acidity of the medium. In organic solvent with a strong acid as the proton source, catalysis initiates directly after a single-electron reduction of CoII to CoI, whereas in the presence of a weaker acid, the cobalt center needs to be reduced twice before catalysis occurs. In the aqueous phase, we found drastically different electrochemical behavior, where the Co(aPPy) complex was found to be a precatalyst to a different electrocatalytic species. We propose that in this active catalyst, the pyridine ring has dissociated and acts as a proton relay at pH ≤ 5, which opens up a fast protonation pathway of the CoI intermediate and results in a high catalytic activity. Furthermore, we determined with constant potential bulk electrolysis that the catalyst is most stable at pH 3. The catalyst thus functions optimally at low pH in an aqueous environment, where the pyridine acts as a proton shuttle and where the high acidity also prevents catalyst deactivation.

Deep Red Light Driven Hydrogen Evolution by Heterojunction Polymer Dots for Diabetic Wound Healing.

We describe small heterojunction polymer dots (Pdots) with deep-red light catalyzed H2 generation for diabetic skin wound healing. The Pdots with donor/acceptor heterojunctions showed remarkably enhanced photocatalytic activity as compared to the donor or acceptor nanoparticles alone. We encapsulate the Pdots and ascorbic acid into liposomes to form Lipo-Pdots nanoreactors, which selectively scavenge •OH radicals in live cells and tissues under 650 nm light illumination. The antioxidant capacity of the heterojunction Pdots is ~10 times higher than that of the single-component Pdots described previously. Under a total light dose of 360 J/cm2, the Lipo-Pdots nanoreactors effectively scavenged •OH radicals and suppressed the expression of pro-inflammatory cytokines in skin tissues, thereby accelerating the healing of skin wounds in diabetic mice. This study provides a feasible solution for safe and effective treatment of diabetic foot ulcers.

Construction of Pt Single-Atom and Cluster/FeOOH Synergistic Active Sites for Efficient Electrocatalytic Hydrogen Evolution Reaction

Construction of Pt Single-Atom and Cluster/FeOOH Synergistic Active Sites for Efficient Electrocatalytic Hydrogen Evolution Reaction

RuSe2 and CoSe2 Nanoparticles Incorporated Nitrogen-Doped Carbon as Efficient Trifunctional Electrocatalyst for Zinc-Air Batteries and Water Splitting.

The development of affordable, highly active, and stable trifunctional electrocatalysts is imperative for sustainable energy applications such as overall water splitting and rechargeable Zn-air battery. Herein, we report a composite electrocatalyst with RuSe2 and CoSe2 hybrid nanoparticles embedded in nitrogen-doped carbon (RuSe2CoSe2/NC) synthesized through a carbonization-adsorption-selenylation strategy. This electrocatalyst is a trifunctional electrocatalyst with excellent hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) activities. An in-depth study of the effect of Se on the electrocatalytic process was conducted. Notably, the incorporation of Se moderately adjusted electronic structure of Ru and Co, enhancing all three types of catalytic performance (HER, η10 = 31 mV; OER, η10 = 248 mV; ORR, E1/2 = 0.834 V) under alkaline condition with accelerated kinetics and improved stability. Density functional theory (DFT) calculation reveals that the (210) crystal facet of RuSe2 is the dominant HER active site as it exhibited the lowest ΔGH* value. The in situ Raman spectra unravel the evolution process of the local electronic environment of Co-Se and Ru-Se bonds, which synergistically promotes the formation of CoOOH as the active intermediate during the OER. The superior catalytic efficiency and remarkable durability of RuSe2CoSe2/NC as an electrode for water splitting and zinc-air battery devices demonstrate its great potential for energy storage and conversion devices.

Solvated Electrons Generated on the Surface of Na-SPHI for Boosting Visible Light Photocatalytic Hydrogen Evolution with Ultra-High AQE.

Enhancing the utilization of visible-light-active semiconductors with an excellent apparent quantum efficiency (AQE) remains a significant and challenging goal in the realm of photocatalytic water splitting. In this study, a fully condensed sulfur-doped poly(heptazine imide) metalized with Na (Na-SPHI) is synthesized by an ionothermal method by using eutectic NaCl/LiCl mixture as the ionic solvent. Comprehensive characterizations of the obtained Na-SPHI reveal several advantageous features, including heightened light absorption, facilitated exciton dissociation, and expedited charge transfer. More importantly, solvated electron, powerful reducing agents, can be generated on the surface of Na-SPHI upon irradiation with visible light. Benefiting from above advantage, the Na-SPHI exhibits an excellent H2 evolution rate of 571.8 µmol·h-1 under visible light illumination and a super-high AQE of 61.7% at 420nm. This research emphasizes the significance of the solvated electron on the surface of photocatalyst in overcoming the challenges associated with visible light-driven photocatalysis, showcasing its potential application in photocatalytic water splitting.

High-Energy Facet Engineering for Electrocatalytic Applications.

The design of high-energy facets in electrocatalysts has attracted significant attention due to their potential to enhance electrocatalytic activity. In this review, the significance of high-energy facets in various electrochemical reactions are highlighted, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CRR). Their importance in various electrochemical reactions and present strategies for constructing high-energy facets are discussed, including alloying, heterostructure formation, selective etching, capping agents, and coupling with substrates. These strategies enable control over crystallographic orientation and surface morphology, fine-tuning electrocatalytic properties. This study also addresses future directions and challenges, emphasizing the need to better understand fundamental mechanisms. Overall, high-energy facets offer exciting opportunities for advancing electrocatalysis.

Steering benzyl alcohol electrooxidation coupled with hydrogen evolution via hetero‐interface construction

AbstractIt is still a challenge to develop electrocatalyst for the efficient adsorption and conversion of organic molecule in aqueous media. Herein, a hetero‐interface structure based on CuO@Ni(OH)2 is rationally designed to enhance the performance of benzyl alcohol oxidation to benzoic acid. A high Faradaic efficiency of 99% and the yield of 3.09 mmol cm−2 h−1 are achieved at 1.70 V versus reversible hydrogen electrode, outperforming the previously reported electrocatalysts. Furthermore, a membrane‐free flow electrolyzer was assembled based on CuO@Ni(OH)2 hetero‐interface, exhibiting a much high yielding of benzoic acid (6.73 mmol cm−2 h−1) and hydrogen (0.35 L cm−2 h−1) with excellent stability. Both experimental data and density functional theory calculations verify that the electron is tend to accumulate at the hetero‐interface, thus accelerating the adsorption of reactant and intermediate and reducing the energy barrier of the conversion of benzyl alcohol to benzoic acid.